Silverflo 960-V Plastic Welder Gun Rapid Heating Hot Stapler Portable Car Bumper Repair Tools with 2 LED Lamp ,200PCS Staples

Model: 960-V

Rated voltage range:120V,220V~240V

Rated power: 50W

Operating ambient temperature: 0～40℃

The tool can be used to repair cracks on plastic.

Operation

1.Connect the hot stapler to a power socket. Clamp a hot staple with the plier and install the staple into the copper tube. Make sure that the staple is pushed all the way in

2.Press the hot staple on the crack and make sure that the hot staple intersects with the crack.

3.Press and hold the activation trigger until the staple melts into the plastic

4.When the plastic solidifies, release the activation trigger. Then, pull the hot stapler to separate

5.Repeat the above procedures until the crack is fully stapled

6.Use a plier to cut off the excess staple leads

NOTICE

During the operation, DO NOT touch the hot staple and copper tube

DO NOT attempt to remove the hot staple leads with bare hands to avoid potential cut injuries on your hand